The fused silica tubes are high purity, outstanding transmission in the deep UV, resistance to deep UV radiation, with OH content 40-300 ppm. It is used for lamps of ozone generation, greese destruction, disinfection for ultrapure water, destruction of airborne grease in commercial kitchens at 185nm and low pressure mercury lamp for deep UV and UV application.
There are many sizes for options, and custom production is available for specific requirement of customer.
• High purity,
• OH content 40-300 ppm,
• Good geometrical performance,
• Free of scratches, bubbles, impurities
Standard Dimension (mm)
Type |
OD |
OD tolerance |
Wall thickness |
WT tolerance |
Ovality |
Siding |
CSA deviation |
Bow (mm/m) |
Typical length |
Synthetic Quartz Tube (Cylinder) |
14-20 |
±0.3 |
1-4 |
±0.3 |
≤0.1 |
≤0.1 |
≤4% |
≤0.7 |
≤1200 |
20-30 |
±0.4 |
1-4 |
±0.2 |
≤0.1 |
≤0.1 |
≤4% |
≤0.7 |
≤1200 |
|
30-40 |
±0.4 |
1-5 |
±0.4 |
≤0.15 |
≤0.15 |
≤4% |
≤1 |
≤1200 |
|
40-60 |
±0.8 |
4-15 |
±0.4 |
≤0.4 |
≤0.4 |
≤4% |
≤0.8 |
≤1200 |
|
60-90 |
±1.75 |
15-27 |
±0.5 |
≤0.5 |
≤0.5 |
≤4% |
≤1 |
≤1200 |
|
Synthetic Quartz Rod |
14-20 |
±0.3 |
- |
- |
≤0.1 |
- |
- |
≤0.7 |
≤1700 |
20-30 |
±0.4 |
- |
- |
≤0.1 |
- |
- |
≤0.7 |
≤1700 |
|
30-40 |
±0.4 |
- |
- |
≤0.15 |
- |
- |
≤1 |
≤1700 |
|
40-60 |
±0.8 |
- |
- |
≤0.4 |
- |
- |
≤0.8 |
≤1700 |
|
60-90 |
±1 |
- |
- |
≤0.5 |
- |
- |
≤1 |
≤1700 |
|
90-120 |
±1.75 |
- |
- |
≤0.5 |
- |
- |
≤1 |
≤1700 |
|
120-150 |
±1.75 |
- |
- |
≤0.5 |
- |
- |
≤1 |
≤1700 |
Chemical Properties
Li |
Na |
K |
Ca |
Mg |
Fe |
Cu |
Mn |
Al |
Ti |
Ni |
Co |
B |
Cr |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
<0.01 |
Strain point (Viscosity 1014.5dPa·s) |
1100℃ |
Annealing point (Viscosity 1013dPa·s) |
1150℃ |
Softening point (Viscosity 107.6dPa·s) |
1620℃ |
Long time operating temperature |
950℃ |
Short time operating temperature |
1200℃ |